Article
  • Evaluation of the NOx Gas Adsorption Removal of the Amine-modified Vinylbenzyl Chloride-Styrene-Divinylbenzene Terpolymer by XPS Analysis
  • Gayeong Yun*, Kwon Mo Koo*, Dong Yeob Lee*, and Yangsoo Kim*,**,†

  • *Department of Nanoscience & Engineering, Inje University, Gimhae 50834, Korea
    **High Safety Vehicle Core Technology Research Center, Inje University, Gimhae 50834, Korea

  • XPS 분석을 활용한 아민으로 개질된 Vinylbenzyl Chloride-Styrene-Divinylbenzene 삼원 공중합체의 NOx 가스 흡착 제거 평가
  • 윤가영* · 구권모* · 이동엽* · 김양수*,**,†

  • *인제대학교 나노융합공학부, **인제대학교 고안전차량핵심기술연구소

Abstract

Nitrogen oxide (NOx) is one of the highly toxic acid gases. In this study, EDA-VBC-S-DVB compound, which is an amine modified terpolymer, was used as a NOx gas adsorption removing material and it was prepared by changing the amount of crosslinking agent in order to evaluate the NOx gas adsorption capacity. Adsorption experiment was carried out with the variation of adsorption time and NOx gas supply capacity. The NOx gas adsorption capacity was quantitatively estimated by the application of XPS analysis and it increased with the amount of crosslinking agent and the NOx gas supply capacity. EDA-VBC-S-DVB compound prepared in this study showed 12.96 mL·h for the critical point of the NOx gas supply capacity, 1.2182 mmol/g for the maximum value of the NOx gas adsorption capacity, and 392% for the maximum value of the NOx gas relative adsorption capacity


NOx 가스는 발생원이 다양하며 높은 독성을 갖는 산성가스 중 하나이다. 본 연구에서는 삼원 공중합체에 아민그룹을 개질시킨 EDA-VBC-S-DVB를 NOx 가스 흡착 제거 물질로 사용하였으며 가교반응에 따른 흡착성능을 비교분석하기 위해 가교제 첨가량을 변화시키면서 제조하였다. NOx 가스 공급용량을 변화시키며 흡착실험을 수행하였으며 XPS 정량분석을 통해 EDA-VBC-S-DVB의 NOx 가스 흡착용량을 평가하였다. 가교제 첨가량과 NOx 가스 공급용량에 따라 NOx 가스 흡착용량이 증가하였으며 본 연구에서 제조한 EDA-VBC-S-DVB의 경우 NOx 가스 공급용량 임계치는 12.96 mL·h, NOx 가스 흡착용량 최대치는 1.2182 mmol/g, NOx 가스 상대 흡착용량은 392%를 보여주었다


Keywords: XPS analysis, NOx gas, adsorption removal, vinylbenzyl chloride-styrene-divinylbenzene terpolymer

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2020; 44(1): 30-37

    Published online Jan 25, 2020

  • 10.7317/pk.2020.44.1.30
  • Received on Aug 22, 2019
  • Revised on Oct 11, 2019
  • Accepted on Oct 27, 2019

Correspondence to

  • Yangsoo Kim
  • *Department of Nanoscience & Engineering, Inje University, Gimhae 50834, Korea
    **High Safety Vehicle Core Technology Research Center, Inje University, Gimhae 50834, Korea

  • E-mail: cheykim@inje.ac.kr