Article
  • Fabrication and Evaluation of Hydrocolloid Wound Dressing Using Synthetic Rubber and Sodium Carboxymethylcellulose (CMC)
  • Kim WI, Lee SW, Park JJ, Ko YG, Park WH, Cho D, Kwon OH
  • 합성고무와 카르복시메틸셀룰로오스(CMC) 나트륨을 이용한 하이드로콜로이드형 창상치료재의 제조 및 평가
  • 김원일, 이승욱, 박재진, 고영광, 박원호, 조동환, 권오형
Abstract
In this study, hydrocolloid wound dressing was fabricated from synthetic rubbers and sodium carboxymethylcellulose (CMC) with different composition ratios. Hydrocolloid wound dressing fabricated in this study showed increased absorptivity, decreased elongation at break and adhesive forces with increasing content of CMC. Hydrocolloid with 40% of CMC is determined as the optimum composition and its elongation at break, adhesive force, water absorptivity and moisture vapor transmission rate were more than 400%, 1.78 kgf/25 mm, 327% and 547 g/m2/day, respectively. Fabricated hydrocolloid was found to have the best property on the in vitro cell culture test, and in vivo animal study showed excellent wound healing effect than control groups. Also there was no stimulation in the skin irritation test. Therefore, it is confirmed that hydrocolloid has the broad application possibility as wound healing materials.

본 연구에서는 합성고무와 sodium carboxymethylcellulose(CMC)를 서로 다른 조성비로 혼합하여 하이드로콜로이드형 창상치료재를 제조하였다. 얻어진 창상치료재는 CMC 함량이 높아질수록 신장률과 점착력은 감소하는 경향을 나타내는 반면에 흡수도는 높아지는 것을 확인할 수 있었다. 최적의 조성으로 판단된 40%의 CMC를 함유하는 하이드로콜로이드의 신장률, 점착력, 흡수도 및 투습도는 각각 400% 이상, 1.78 kgf/25 mm, 327% 및 547 g/m2/day임을 확인하였다. 제조된 하이드로콜로이드의 세포배양실험 결과 세포적합성이 우수하였고, 동물실험 결과 대조군에 비하여 우수한 창상치유 효과를 보였으며, 피부자극성시험 결과 자극이 없는 것으로 나타났다. 따라서 본 연구에서 제조한 하이드로콜로이드는 의료용 창상치료재로서의 적용 가능성이 높음을 알 수 있었다.

Keywords: hydrocolloid; synthetic rubber; CMC; natural polymers; wound healing; dressing material

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2016; 40(1): 101-108

    Published online Jan 25, 2016

  • 10.7317/pk.2016.40.1.101
  • Received on Aug 26, 2015
  • Revised on Nov 30, -0001
  • Accepted on Oct 17, 2015

Correspondence to

  • E-mail: