Article
  • Functionalized Graphene/Polyimide Nanocomposites under Different Thermal Imidization Temperatures
  • Ju J, Chang JH
  • 열 이미드화 온도에 따른 작용기화 그래핀/폴리이미드 나노복합재료
  • 주지은, 장진해
Abstract
4-Amino-N-hexadecylbenzamide-graphene sheets (AHB-GSs), used in the preparation of the polyimide (PI) nanocomposite films, were synthesized by mixing a dispersion of graphite oxide with a solution of the ammonium salt of AHB. The atomic force microscope image of functionalized-GS on mica and a profile plot revealed the average thickness of AHB-GS to be ~3.21 nm. PI films were synthesized by reacting 4,4'-biphthalic anhydride and bis(4-aminophenyl) sulfide. PI nanocomposite films containing various contents of AHB-GS over the range of 0-10 wt% were synthesized using the solution intercalation method. The PI nanocomposite films under different thermal imidization temperatures, 250 and 350 oC, were examined. The graphenes, for the most part, were well dispersed in the polymer matrix despite some agglomeration. However, micrometer-scale particles were not detected. The average thickness of the particles was <10 nm, as revealed from the transmission electron microscope images. Only a small amount of AHB-GS was required to improve the gas barrier, and electrical conductivity. In contrast, the glass transition and initial decomposition temperatures of the PI hybrid films continued to decrease with increasing content of AHB-GS up to 10 wt%. In general, the properties of the PI hybrid films heat treated at 350 oC were better than those of films heat treated at 250 oC.

폴리이미드(PI) 나노복합체 필름 제조에 사용된 작용기화 4-amino-N-hexadecylbenzamide graphene sheets (AHB-GSs)는 graphene oxide 분산액에 4-amino-N-hexadecylbenzamide(AHB)를 반응시켜 합성하였다. AHB-GS의 주사탐침 현미경(atomic force microscope, AFM) 이미지와 모식도를 통해서 AHB-GS의 평균 두께가 약 3.21 nm임을 확인하였다. PI는 4,4'-biphthalic anhydride와 bis(4-aminophenyl)sulfide를 사용하여 합성하였다. PI 나노복합체는 0-10 wt%의 다양한 함량의 AHB-GS를 용액 삽입(solution intercalation) 방법을 사용하여 합성하였고, 이미드화는 각각 250 oC 및 350 oC까지 열 처리하였다. AHB-GS는 대부분 고분자 매트릭스에 잘 분산되었고 약간 뭉친 것도 있었지만 마이크로미터 수준의 입자는 관찰되지 않았다. TEM으로 관찰하였을 때, 평균적으로 입자의 두께는 10 nm 미만이었다. PI 복합체 필름 중 소량의 AHB-GS만으로도 가스 투과도와 전기 전도도는 향상되었지만, 반대로 유리전이 온도와 초기 분해 온도는 AHB-GS의 함량이 10 wt%까지 증가함에 따라 지속적으로 감소되는 경향을 보였다. 전체적으로는, 250 oC까지 이미드화한 PI에 비해 350 oC까지 열처리한 PI 필름이 보다 향상된 특성을 보였다.

Keywords: graphene oxide; functionalized graphene sheet; polyimide; nanocomposite; film.

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2015; 39(1): 88-98

    Published online Jan 25, 2015

  • 10.7317/pk.
  • Received on May 26, 2014
  • Revised on Nov 30, -0001
  • Accepted on Jul 28, 2014

Correspondence to

  • E-mail: