Article
  • Thermal Decomposition and Mechanical Properties of Polycarbonate/ABS Blends Prepared by High Shear Rate Processing
  • Yoo JJ, Yong DK, Lee HK, Kim DS, Lee HI, Kim SH, Lee KY, Lee SG
  • 고속전단에 의한 폴리카보네이트/ABS 블렌드의 열분해 및 기계적 특성 연구
  • 유재정, 용다경, 이한기, 김대식, 이형일, 김선홍, 이기윤, 이승구
Abstract
Polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS) blends were prepared using a high shear extruder to investigate their thermal decomposition and mechanical properties with shear rate and shear time. In this experiment, high shear rate, from 1000 to 3000 rpm, in blending process was applied for 10 to 40 sec, respectively. At high shear rate over than 2000 rpm, the initial decomposition temperature was dropped significantly compared to a compounded sample because of thermal decomposition of the blend by high shear. Consequently, high shear processing gave an important effect on the mechanical and thermal properties of the PC/ABS blend. In particular, elongation of the blend decreased significantly with shear rate.

Polycarbonate(PC)/acrylonitrile-butadiene-styrene(ABS) 블렌드를 고속전단압출성형기로 1000 rpm 이상의 스크류 속도로 압출하여 전단속도와 전단시간에 따른 PC/ABS 블렌드의 열분해와 기계적 특성을 조사하였다. 고속전단 조건으로 스크류 회전속도를 1000에서 3000 rpm 범위에서 조절하였고, 전단부하시간은 10에서 40초로 변화를 주었다. 그 결과, 2000 rpm 이상의 고속전단을 통해 얻어진 시편의 경우, 고분자의 열분해의 발생으로 열분해 시작 온도가 낮아졌다. 스크류 회전속도와 전단부하시간에 따라 열분해에 의하여 시편의 인장강도와 신율이 낮아지는 결과를 얻었다. 이러한 PC/ABS 블렌드의 고속전단 조건에 따라 기계적 특성이 크게 변화하였으며 특히, 신율이 고속전단에 크게 영향을 받았다.

Keywords: PC/ABS; polymer blend; high-shear; thermal decomposition; mechanical properties.

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2014; 38(4): 471-476

    Published online Jul 25, 2014

  • 10.7317/pk.
  • Received on Dec 23, 2013
  • Revised on Nov 30, -0001
  • Accepted on Mar 5, 2014

Correspondence to

  • E-mail: