Article
  • Application of Polycarbonate Diol Prepared with Carbon Dioxide in the Field of Waterborne Polyurethane
  • Lim JW, Oh HJ, Kim Y, Jeong KE, Yim JH, Ko YS
  • 이산화탄소를 이용하여 제조된 폴리카보네이트 디올의 수분산 폴리우레탄에 응용
  • 임재우, 오형진, 김영조, 정광은, 임진형, 고영수
Abstract
Poly(cyclohexane carbonate) diol was synthesized by the alternating copolymerization of cyclohexene oxide and CO2 over Cr based transition metal catalysts. The prepared PCCD was applied as a precursor for the preparation of waterborne polyurethane (PUD) in order to investigate an application field of carbon dioxide-based polycarbonate. The scratch resistance and thermal properties of PUDs, which was prepared with two kinds of polymeric diols (PCD and PCCD) were investigated. The scratch resistance and thermal decomposition temperature of PUD film prepared with PCCD is worse than those prepared with PCD, poly(hexamethylene carbonate) glycol. While, glass transition temperature of PUD film prepared with PCCD was higher than that prepared with PCD. It might be due to the rigid cyclohexane structure in the PCCD.

이산화탄소와 에폭사이드를 크롬계 전이 금속촉매를 이용하여 교대 공중합하여 poly(cyclohexane carbonate) diol(PCCD)을 분자량 별로 제조하였다. 이산화탄소를 기반으로 한 폴리카보네이트(PCCD)의 응용분야 탐색을 위하여 수분산 폴리우레탄(PUD) 제조를 위한 전구체로 적용하여 보았다. 상업화되어 사용중인 폴리카보네이트 디올과 신규 PCCD로 제조한 PUD의 내스크래치 특성과 열적 특성을 비교 분석하였다. PCCD를 사용하여 제조된 PUD 필름의 내스 크래치성과 열분해온도는 PCD를 사용한 경우보다 떨어지지만, 유리전이온도는 증가하는 것을 알 수 있었다. 이것은 PCCD의 강직한 사이클로 헥산 구조에 기인한 것으로 생각된다.

Keywords: polyurethane; poly(hexamethylene carbonate) glycol; poly(caprolactone) glycol; carbon dioxide

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2010; 34(6): 507-510

    Published online Nov 25, 2010

  • 10.7317/pk.
  • Received on May 3, 2010
  • Revised on Nov 30, -0001
  • Accepted on Jun 15, 2010

Correspondence to

  • E-mail: