Article
  • Preparation of Composite Particles via Electroless Nickel Plating on Polystyrene Microspheres and Effect of Plating Conditions
  • Kim BC, Park JH, Lee SJ
  • 무전해 니켈 도금된 폴리스티렌 복합 입자 제조 및 도금 조건의 영향
  • 김병철, 박진홍, 이성재
Abstract
Polymer core and metal shell composite particles have been prepared by the electroless nickel plating on the surface of monodisperse polystyrene microspheres. Various sizes of polystyrene particles with highly monodisperse state could be synthesized by controlling the dispersion medium in dispersion polymerization. Electroless nickel plating was performed on the polystyrene particle with diameter of 3.4 μm. The morphology of polystyrene/nickel composite particles was investigated to see the effect of the plating conditions, such as the PdCl2 and glycine concentrations and the dropping rate of nickel plating solution, on nickel deposition. With PdCl2 and glycine concentrations at more than 0.4 g/L and 1M, respectively, more uniform nickel layer and less precipitated nickel aggregates were formed. At the given plating time of 2 h, the same amount of plating solution was introduced by varying the dropping rate. Though the effect of dropping rate on particle morphology was not noticeable, the dropping rate of 0.15 mL/min for 60 min showed rather uniform plating.

무전해 니켈 도금법을 사용하여 단분산 폴리스티렌 입자 표면에 니켈이 도금된 고분자 코어/금속 쉘의 복합 입자를 제조하였다. 단분산 입자는 분산중합으로 제조하였는데 사용한 분산매질의 종류에 따라 다양한 크기의 단분산 폴리스티렌 입자를 제조할 수 있었다. 그 중 직경 3.4 μm 크기의 단분산 폴리스티렌 입자를 선택하여 무전해 니켈 도금을 시도하였다. 니켈 도금에 영향을 미치는 도금 조건을 파악하기 위하여 활성화제인 PdCl2의 농도, 착화제인 glycine의 농도와 니켈 도금액의 투여 시간에 따른 니켈 도금된 폴리스티렌 복합 입자의 모폴로지를 관찰하였다. 본 연구조건하에서는 PdCl2의 농도 0.4 g/L, glycine 농도 1 M 이상인 경우 폴리스티렌 입자 위에 균일한 두께의 니켈층을 형성하였고 석출되는 니켈도 적었다. 도금 시간 2 시간 중에서 동일양의 도금액을 투여 속도를 달리하며 도금한 경우 모폴로지 상의 뚜렷한 차이는 없었으나 0.15 mL/min 속도로 1시간 동안 투여한 경우가 상대적으로 균일한 도금 특성을 보여 주었다.

Keywords: monodisperse polystyrene particle; electroless nickel plating; pre-treatment condition

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2010; 34(1): 25-31

    Published online Jan 25, 2010

  • 10.7317/pk.
  • Received on Jul 31, 2009
  • Revised on Nov 30, -0001
  • Accepted on Oct 25, 2009

Correspondence to

  • E-mail: