Article
  • Preparation and Properties of Poly(vinyl alcohol)/Chitosan Blend Films
  • Jeong MG, Kim DS, Choi YH, Son TW, Kwon OK, Lim HS
  • 폴리(비닐 알코올)/키토산 블렌드 필름의 제조 및 특성
  • 정민기, 김대선, 최용혁, 손태원, 권오경, 임학상
Abstract
Poly(vinyl alcohol)(PVA)/chitosan blend films with non-toxicity, biodegradability, and biocompatibility were prepared by solution casting. Variation of the physicochemical properties of the blend films was investigated through to several analysis methods. Examination of antibacterial properties revealed that bacterio-static ratios of all blend samples containing chitosan more than 10 wt% were greater than 99.9 %. Moisture regain was increased with increasing chitosan content but the degree of swelling was decreased. Up to chitosan content 15 wt%, the melting and crystallization temperature of blend films was increased with chitosan content. The blends containing chitosan content 10 and 15 wt% gave melting temperature 229 and 228 ℃, respectively. However, the melting temperature was decreased if chitosan content exceeded 20 wt%. The mechanical properties of the blend films were increased with increasing chitosan content in both dry and wet states. The blend film including 15 wt% chitosan exhibited unusually high tensile strength.

독성이 없고 생분해성과 생체적합성을 가지는 폴리(비닐 알코올)/키토산 블렌드 필름들은 용액상태로 캐스팅하여 제조하였다. 블렌드 필름들의 물리화학적 특성들의 변화는 여러 가지의 분석방법을 통해 조사하였다. 항균특성의 고찰에서 키토산이 10 wt% 이상 함유된 모든 블렌드 필름의 정균율은 99.9%로 우수하게 나타났다. 수분율은 키토산의 함량이 증가함에 따라 증가하나 팽윤도는 감소하였다. 키토산 함량이 15 wt%내에서는 블렌드 필름의 용융온도와 결정화온도가 키토산의 함량에 따라 증가하였다. 또한, 키토산이 10, 15 wt% 함유된 블렌드 필름들은 용융온도가 각각 229와 228 ℃로 순수 PVA보다 높은 값을 나타내었다. 그러나 키토산 함량이 20 wt%이상일 경우 용융온도는 감소하였다. 블렌드 필름의 역학적 특성들은 습윤상태 및 건조상태 모두 키토산 함량이 증가함에 따라 증가한다. 키토산 함량이 15 wt%내에서 높은 인장강도를 나타낸다.

Keywords: PVA; Chitosan; Blend; Thermal behavior; Mechanical properties

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2004; 28(3): 253-262

    Published online May 25, 2004

  • 10.7317/pk.
  • Received on Dec 22, 2003
  • Revised on Nov 30, -0001
  • Accepted on May 20, 2004

Correspondence to

  • E-mail: