Article
  • Preparation and Characterization of Biodegradable Poly(ε-caprolactone) Microcapsules Containing Erythromycin by Emulsion Solvent Evaporation Technique
  • Park SJ, Kim SH, Lee JR, Lee HB, Hong SK
  • 액중건조법을 이용한 항생제를 함유한 생분해성 폴리카프로락톤 마이크로캡슐의 제조 및 특성
  • 박수진, 김승학, 이재락, 이해방, 홍성권
Abstract
The purpose of this work was the producing of a biodegradable poly(ε-caprolactone) (PCL) microcapsule and the analyzing of form and features for the manufacturing conditions which could be observed in a prospective drug delivery systems (DDS) through drug release. The effects of different stirring rates, stirring times and concentrations of emulsifier for the diameter and form of the microcapsules were observed using image analyzer (IA) and scanning electron microscopy (SEM). As a result, the microcapsules were made in wrinkle and spherical forms with a mean particle size of 40∼300±20 μm. PCL microcapsules containing drugs were confirmed using FT-IR spectra. The role of interfacial adhesion between PCL and drug was determined by contact angle measurements. The drug release test of PCL microcapsules was characterized by UV/vis. spectra. It was found that the drug release rate of the microcapsules prepared with high concentration emulsifier was significantly fast.

본 실험에서는 PCL 마이크로캡슐을 제조하여 형태적 분석 및 제조 조건에 따른 특성을 살펴보고 약물방출거동을 통하여 약물전달체계로서의 가능성을 고찰하였으며 액중건조법을 사용하여 약물을 함유한 마이크로캡슐을 제조하였다. 마이크로캡슐 입경과 형태는 교반속도, 교반시간 그리고 유화제의 농도에 따라 어떠한 영향을 받는가에 대하여 관찰하였다. 마이크로캡슐의 모양과 표면을 image analyzer와 SEM으로 관찰한 결과 제조된 마이크로캡슐은 평균 입경이 40∼400±20 μm로 주름이 발달된 구형의 형태였다. 제조된 PCL 마이크로캡슐의 약물함유 여부는 FT-IR을 사용하여 확인하였고 접촉각 측정을 통해 PCL과 약물간의 계면에서의 부착일을 살펴보았다. 또한 방출거동을 살펴보기 위해 UV/vis. 흡광광도법으로 흡광도를 측정하여 용출된 약물의 양을 정량 하였으며, 그 결과, 유화제의 농도를 높게 하여 제조한 마이크로캡슐의 약물 방출이 상당히 빠름을 알 수 있었다.

Keywords: microcapsule; polycaprolactone (PCL); drug release; work of adhesion

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2002; 26(3): 326-334

    Published online May 25, 2002

  • 10.7317/pk.
  • Received on Dec 28, 2001
  • Revised on Nov 30, -0001
  • Accepted on Apr 22, 2002

Correspondence to

  • E-mail: