Article
  • The Effect of Chemical Modification and Interlaminar Weld-Line on Physical Properties of PP/Continuous Glass Fiber Composite Systems
  • Lee Y, Kim J, Yoon K, Nam J, Kim D
  • 화학적 개질과 층간 Weld-Line이 PP/유리 장섬유 복합재료의 물성에 미치는 영향에 대한 연구
  • 이영관, 김준명, 윤강배, 남재도, 김동욱
Abstract
In this study, the effect ofthe concentration of anhydride modified polypropylene(MPP) and the interlaminar weld-line on mechanical properties offil stacking processed polypropylene/glass fabric composite systems were investigated. A thermally-expandabel rubber tool was used to impregnate the matrix by maintaining a relatively uniform pressure. A pseudo-steady state approximation was usedtocalculate the resin-impregnation time and at the center and from two film at the top and bottom sides, the two-film process produced an interlaminar weld-line at the laminate center, and took one-fourth shorter impregnation adhesive strength between fiber and matrix. The impact strength of PP matrix only composite was higher than that of MPP laminates, and interlaminar weld-line at the laminate center seemed to increase the impact strength. The optimum content of MPP was observed to be ∼50% in tensile tests.

본 신험에서는 필름적층법을 이용하여 PP/유리섬유 복합재료를 제조할 때 maleic anhydride modified polypropylene (MPP) 함량의 변화와 성형시 발생하는 층간 weld-line이 복합재료의 기계적 물성에 미치는 영향을 연구하였다. 열가소성 복합재료의 필름적층 공정에 있어서 함침거리와 함침시간을 계산한 결과, weld-line이 존재할 경우가 존재하지 않은 경우보다 함침거리가 짧기 때문에 함침압력은 작고 함침시간은 약 5배정도 빠른 것을 알 수 있다. Three-point bending test와 SEM 사진으로부터 MPPDML 함량이 증가함에 따라 복합재료가 우수한 접착력을 나타낸다는 것을 알 수 있었으며, 충격시험에서는 PP만을 사용한 복합재료가 높은 충격 에너지를 흡수하다는 것으로 나타났다. 또한 인장강도 시험에서는 PP와 MPPDML 함량이 1 : 1로 될 때 가장 우수한 물성을 나타냈으며 weld-line이 존재하는 경우 더욱 우수한 충격강도를 나타내었다.

Keywords: polypropylene; modified polypropylene; glass mat; film stcking; weld-line

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1999; 23(6): 892-901

    Published online Nov 25, 1999

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: