Article
  • Factors Affecting Morphology and Property of Polymer Blend Via Reactive Process Ⅰ.
  • Lee CW, Ryu SH
  • 반응 고분자블렌드의 구조와 성질에 영향을 미치는 인자에 관한 연구Ⅰ.
  • 이창우, 류승훈
Abstract
The morphology and thermal properties of nylon-6 and ABS blends with reactive compatibilizer have been studied as a function of viscosity ratio of the components, concentration of compatibilizer, and the components ratio. Viscosity ratio of the nylon-6/ABS was varied from 0.3 to 2.0. For 20 wt% nylon and 80 wt% ABS blends, nylon was a dispersed phase and the size of the dispersed phase was decreased by the addition of compatibilizer. It was found that the minimum particle size occurred at the viscosity ratio of 0.75 with or without compatibilizer. Dispersed phase size was decreased significantly by the addition of compatibilizer and tended to level off from 15∼20 wt% compatibilizer based on the amount of nylon. For 50 wt% nylon and 50 wt% ABS blend, the nylon and ABS showed co-continuous phase. No significant difference of the peak melting temperature and crystallinity was observed, while crystallization temperature was decreased with increasing the concentration of compatibilizer.

나일론-6/ABS/반응성 상용화제 계를 이용하여 나일론-6와 ABS의 점도비, 상용화제의 함량 조성에 따른 모폴로지와 열적성질의 변화에 관하여 살펴보았다. 나일론-6/ABS의 점도비는 0.3∼2.0 범위를 나타내었다. 나일론-6/ABS의 중량비가 2 : 8인 조건에서 나일론-6는 분산상을 이루었으며, 상용화제의 첨가는 급격한 분산상 크기의 감소를 초래하였다. 분산상 크기는 상용화제의 첨가와 상관없이 나일론-6/ABS 점도비가 약 0.75일때 가장 작은 크기를 나타내었다. 분산상의 크기는 상용화제의 함량이 증가함에 따라 감소하며 나일론대비 15∼20 중량%부터 일정한 값을 나타내었다. 나일론-6와 ABS의 함량비가 5 : 5인 경우 서로 연속상의 구조를 나타내었다. 블렌드의 용융점와 결정화도는 상용화제의 영향을 거의 받지 않은 반면 결정화 온도는 상용화제의 함량이 증가할수록 감소하는 추세를 나타내었다.

Keywords: reactive blend; nylon-6; ABS; reactive compatibilizer; morphology; viscosity ratio

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1996; 20(2): 251-259

    Published online Mar 25, 1996

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: