Article
  • Effect of Aspect-Ratio in Rod Impact Test for the Determination of Dynamic Material Properties of Polycarbonate at High-Strain-Rate
  • Min OK, Nam CH, Lee JM
  • 고 변형률 속도하에서의 폴리카아보네이트의 동적 물성 결정을 위한 봉 충격 시험법에 있어서 종횡비의 효과
  • 민옥기, 남창훈, 이정민
Abstract
Effect of aspect-ratio in rod impact test for the determination of dynamic material properties of polycarbonate at high-strain-rate has been investigated. Data for the calculation of dynamic material properties have been obtained with flat-ended cylindrical rod specimens having aspect-ratios from 2 to 5, in the range of impact velocity from 150 to 250 m/sec by a compressed-air system. The calculation has been performed by theories based on one-dimensional elastic-plastic wave propagation phenomena. The dynamic material properties of polycarbonate are dependent on the aspect-ratio and the effect diminishes with the increase of aspect-ratio. For the valid application of theories which use the concept of one-dimensionality, rod impact test should be performed by using the rod specimen haying relatively high aspect-ratio. The dynamic yield stress determined by rod impact test shows the abrupt increase in the range of strain-rate 103∼105sec-1.

고 변형률 속도하에서 폴리카아보네이트의 동적 물성 결정을 위한 봉 충격 시험법에 있어서 종횡비의 효과에 대하여 연구하였다. 동적 물성의 계산을 위한 기초 데이타는 종횡비 범위 2∼5인 끝면이 평면인 원통형 시험편을 공압 장치에 의하여 속도 범위 150∼250m/sec로 충돌시켜 얻었다. 동적 특성은 탄소성 파동 전파 이론에 의하여 계산하였다. 폴리카아보네이트의 동적 특성은 종횡비에 의존하며 그 효과는 종횡비가 증가함에 따라 감소한다. 일차원 개념을 이용한 이론을 타당하게 적용하려면 상대적으로 고 종횡비를 갖는 시험편을 사용하여 실험하여야 한다. 한편 봉 충격 시험에 의하여 도출된 폴리카아보네이트의 동적 항복 응력은 변형률 속도 범위 103∼105sec-1에서 급격한 증가를 나타낸다.

Keywords:

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1992; 16(4): 375-382

    Published online Jul 25, 1992

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: